1998 Honda Accord Door lock wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44202
Printed Date: June 08, 2024 at 12:05 AM

Topic: 1998 Honda Accord Door lock wire

Posted By: bx6768
Subject: 1998 Honda Accord Door lock wire
Date Posted: December 01, 2004 at 10:29 AM

I try to install remote starter/keyless entry on 1998 Honda Accord LX. And I find the door lock and unlock wire are Org and Blk/Blu. However, I can't find these two wires at the passager side fuse-replay box. There are too many wires, and I don't know which is the right slot.
I take two pictures from the glovebox side and the doorside. Please point out the location of the wires.
https://www.pbase.com/timefine/accord

Another question, when the door locked, whether the lock-wire will always be 0V while unlock-wire will always be +12V until unlock the door.

Sorry for such silly question. It is my time to DIY a car.

Replies:

Posted By: thornberry
Date Posted: December 01, 2004 at 10:53 AM

passenger side fuse box is where you will find the lock and unlock wires in the for right connector as for the signal its a - grd pulse.

Posted By: Patel
Date Posted: December 01, 2004 at 11:13 AM

try this:

3- org lock
4- blk.blu unlock

ok i can't seem to upload the pic
but if u look carefully at ur pic the far right plug
there is a org wire 4th dwon and the blu/blk 8th dwn
i usually unlpug the conn, make the wire connections then plug it back
posted_image

Posted By: bx6768
Date Posted: December 02, 2004 at 12:34 AM

Thanks alot! I will try this weekend. posted_image