2004 Intrepid

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44327
Printed Date: May 09, 2024 at 4:33 AM

Topic: 2004 Intrepid

Posted By: thsonnen
Subject: 2004 Intrepid
Date Posted: December 02, 2004 at 9:59 PM

I want to hook up a remote start to my factory keyless entry system, but I don't know exactly what wire wire to hook up to the activation wire on the remote start unit.
Anybody know? Thanks.

Replies:

Posted By: zargon
Date Posted: December 02, 2004 at 10:12 PM

the real question is what wire are going to use from the car to the remote start? hook it to lock or unlock and it will start every time you lock or unlock the door, if you remote start lets you choose the number of pulses to trigger remote start then maybe set on two or three pulses you could use an output to the door motors, and yet you would have very little range,

-------------
zargon ruler of estranorth

Posted By: snguyen
Date Posted: December 03, 2004 at 9:12 AM

Range is very important when talking about remote start, see what the range is on your current keyless entry system. If you have to get close to the vehicle to unlock/lock door, then that is where you will need to stand to start your vehicle.

Print Page | Close Window