2000 dodge interpid

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44743
Printed Date: June 09, 2024 at 2:12 PM

Topic: 2000 dodge interpid

Posted By: cuttdawg85
Subject: 2000 dodge interpid
Date Posted: December 08, 2004 at 5:53 PM

i have an APS 350 alarm i want to put in this intrepid....Im a lil confused on the door locks and how to wire them up. Also how do i trigger the factory disarm?

Thanks in advance!!!

Replies:

Posted By: mxxmikexx
Date Posted: December 08, 2004 at 11:35 PM

try this link door lock diagrams
you need a
it will show you how to properly hook up your door locks.

disarm is a light GREEN/ orange in the drivers kick panel which needs a positive pulse with a 680 ohm resistor placed in line.

Posted By: cuttdawg85
Date Posted: December 09, 2004 at 12:18 AM

what would i use to send that positive pulse to the factory disarm?

Print Page | Close Window