Print Page | Close Window

1992 Ford F-150 remote starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44912
Printed Date: May 02, 2024 at 9:07 AM


Topic: 1992 Ford F-150 remote starter

Posted By: deeg65
Subject: 1992 Ford F-150 remote starter
Date Posted: December 10, 2004 at 8:20 PM

Thanks for all of your help.  Does anyone have the ignition wiring diagram for a 1992 Ford F-150?  Also, does anyone know what the bonnet sensor on this starter does and where it should be mounted?  Thanks Guys!

-------------
f150fixer



Replies:

Posted By: BNLUIS
Date Posted: December 10, 2004 at 8:23 PM

Here is the wiring as far as the other thing I am not familiar with that kind of starter.posted_image

ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |
|              12V|yellow              |+  |ignition harness            |
|          STARTER|RED / lt. blue        |+  |ignition harness            |
|         IGNITION|RED / lt. green       |+  |ignition harness            |
|        ACCESSORY|gray / YELLOW         |+  |ignition harness            |
|       POWER LOCK|pink / YELLOW         |5wi|pass kick panel *1          |
|     POWER UNLOCK|pink/green          |5wi|pass kick panel *1          |
| PARKING LIGHTS +|brown               |   |lt switch or dr kick        |
|       HEADLIGHTS|RED / yellow          |+  |at switch                   |
|     DOOR TRIGGER|BLACK/ blue          |+  |driver kick panel           |
|       TACHOMETER|tan / YELLOW *2       |   |at coil                     |
|       BRAKE WIRE|lt. green           |+  |brake pedal switch          |
|     HORN TRIGGER|dk. blue            |-  |steering column             |
|           WIPERS|                    |   |                            |
|  LF WINDOW UP/DN|yellow - red        |A  |in drivers door             |
|  RF WINDOW UP/DN|yel/blk - RED / blk   |A  |in drivers door or pkp      |

Notes:
*1 ESSENTIAL to use driver's switch when testing for switch and motor sides. E-brake bracket blocks easy access from driver's side.  *2 On diesel trucks use WHITE/ black at the alternator for tach. Also the wait to start wire is BLACK/ pink (-) at the warning light on the dash or the glow plug controller on the center rear of the engine.



-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.





Print Page | Close Window