clifford Avant Guard 4

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45214
Printed Date: June 04, 2024 at 6:11 AM

Topic: clifford Avant Guard 4

Posted By: ashwin
Subject: clifford Avant Guard 4
Date Posted: December 14, 2004 at 4:32 PM

hello,

i bought a second hand ag4 the installation manual i downloaded from this site, but there is nothing in there about the central door locking

i'm driving a vw passat of '91 which have positive door locks but the clifford main unit sends out a negative pulse can someone help me out please

an idea or the manual for the door locks

thanks, ashwin

Replies:

Posted By: hagmanti
Date Posted: December 14, 2004 at 8:18 PM

Try converting polarity.

But looking at the manual myself, I don't think you need to do that. On the 14-pin connector, take WHITE/ orange and WHITE/ green to ground. Leave gray/green and gray/orange unconnected, and hook RED / orange and RED / green to unlock and lock respectively, and I think you should be good...

That's a _cool_ alarm!

Me

Posted By: scirocco16v
Date Posted: December 14, 2004 at 8:39 PM

Hood the RED / orange and RED / green to +12volts and WHITE/ green to lock wire and WHITE/ orange to unlock wire. grays/ stripes are unused in this situation. this will do it.

Posted By: hagmanti
Date Posted: December 15, 2004 at 12:10 AM

Wow, thanks scirocco16v. I totally biffed and wired negative door locks...

Me

Posted By: OmarR
Date Posted: December 15, 2004 at 6:08 PM

Here is the illustrated version:

https://home.san.rr.com/iroc/MISC/doorlock_wiring.pdf

Print Page | Close Window