2000 Mazda Millinia Disarm wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46856
Printed Date: May 28, 2024 at 9:26 PM

Topic: 2000 Mazda Millinia Disarm wire

Posted By: jayyzr
Subject: 2000 Mazda Millinia Disarm wire
Date Posted: January 04, 2005 at 7:12 AM

I installed a alarm w/remote start on a 2000 Millinia, When ever I lock the doors the factory security alarm arms as well, therefore when I got to unlock or remote start the factory alarm goes off.. Does that mean I have the wrong Disarm wire... 1 sheet says its light GREEN/ red(-) in kick panel. the other says blue / YELLOW(+) key snse wire at ign switch... any input would be helpful

-------------
Taking It 1 Wire @ A Time...

Replies:

Posted By: snguyen
Date Posted: January 04, 2005 at 7:52 AM

OEM Alarm Disarm:

LT. GREEN/ RED (-)

IN HARNESS COMING IN FROM DRIVER'S DOOR

Posted By: jayyzr
Date Posted: January 04, 2005 at 8:28 AM

so if the factory disarm wire from the alarm I installed gives a (+) trigger then I need a relay to make it a (-) trigger?

-------------
Taking It 1 Wire @ A Time...

Posted By: snguyen
Date Posted: January 04, 2005 at 8:31 AM

yes

Posted By: jayyzr
Date Posted: January 04, 2005 at 8:38 AM

Thanks alot..that was killing me... then I saw some old questions that asked the same question but didn't get answer they wanted about the same car... thanks again..

-------------
Taking It 1 Wire @ A Time...

Print Page | Close Window