03 Legacy

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47027
Printed Date: May 12, 2024 at 10:40 AM

Topic: 03 Legacy

Posted By: solartech
Subject: 03 Legacy
Date Posted: January 05, 2005 at 11:10 PM

How can you correctly by pass the factory security system

Replies:

Posted By: snguyen
Date Posted: January 05, 2005 at 11:20 PM

factory remote only.

Posted By: solartech
Date Posted: January 05, 2005 at 11:52 PM

could I just unplug the factory security system? I installed a remote start w/keyless already. The problem is if the customer locks the doors with the lock switch on the door the system will arm. Then my system will tigger it.

Posted By: cgalvin29
Date Posted: January 06, 2005 at 1:47 AM

Some subaru security systems can be put i valet mode but that totally disables the sec system and the customer might not want that.

Posted By: KarTuneMan
Date Posted: January 08, 2005 at 7:59 PM

Ask your customer to ONLY lock and unlock with your (their) new transmitter.

-------------

Posted By: solartech
Date Posted: January 08, 2005 at 8:09 PM

KarTuneMan wrote:

Ask your customer to ONLY lock and unlock with your (their) new transmitter.

lock and unlock with only trasmitter would work but if the customer hit the doorlock switch the factory alarm will arm and my unit will not dissarm it. Then the customer is stuck with an alarm going off and no way to start the car. I tried this and the customer came back saying she was unable to start the car as she was only carrying my remote not the factory.

-------------
Solartech Window Tinting & Electronics Inc.