HELP!!!
I got the install done, leared the remotes, then all the sudden after tring to program some of the features, the alarm was triggered and the remotes stopped responding....
Now no matter what I do, the alarm is set off. I can unplug the brain than plug it back in, but right away the alarm is triggered again and the remotes dont work.
I've tried the factory reset proccedures with the alarm running but it doesnt work(I'm assuming because the alarm is triggered)..
This all happened last night and I had to pull the brain to drive home. I'm willing to go at it again this evening but I need some help..
The install was done at a friends shop and he is a licenced mechanic, he is confided all the wireing is done right. (the fact that it was working and we did once learn the remote codes should mean something no???)
Anyways I'm new here but I dont know where to turn, if anyone has an opinion let me know!..
thanks in advance,
Al.
Constant up to 60 seconds | - • Alarm condition generated by an intrusion, by triggering Panic Mode, or when the Module is powered up.
|
Plug the module in and let it alarm for at least 60sec, it should stop. You should be able the shut off panic mode by pressing lock and unlock at the same time. You may need to go through the transmitter learning process and programing again.
Good Luck
Craig.
craig, it looks like you cut and past that from somewhere.. do you have a link to online docs?? that could help too. the manual that came with it is pretty lame.. anyways I'll try what you mentioned tomorow and let you all know if it helped.. if anyone else has an oppinion, please the more things I can try on knowledge I can ingest here the better luck I'll have tomorow..
Thanks agian,
Al.
Craig you rock.. Thanx a tun!!!
Al.