Help with my Clifford RSX 3.5
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47734
Printed Date: June 07, 2024 at 10:21 PM
Topic: Help with my Clifford RSX 3.5
Posted By: eclipse98holla
Subject: Help with my Clifford RSX 3.5
Date Posted: January 14, 2005 at 8:53 PM
I have an RSX 3.5 and I am hooking it up to my 2004 Honda Civic, all I need to know is what each color coming out of the remote start relay box corresponds to with the Ignition, Starter, etc... Can anyone help me out???
-------------
Daniel Smith
Replies:
Posted By: Falcon 1
Date Posted: January 15, 2005 at 1:15 PM
What info are you looking for? The vehicle wire colors or the remote start wiring schematics?
-------------
Do it right the first time, only a doctor can bury his mistakes.
Posted By: eclipse98holla
Date Posted: January 15, 2005 at 6:11 PM
Im looking for the remote start wiring schematics... ------------- Daniel Smith
Posted By: Falcon 1
Date Posted: January 15, 2005 at 6:49 PM
These are the colors for the heavy gauge wires for ignition, starter etc. 1. PURPLE-starter side of starter wire 2. GREEN-key side of starter wire 3. RED-12volt constant input 4. ORANGE-accessory output 5. PINK/WHITE-2nd ignition output 6. RED / WHITE-12volt constant input 7. PINK-ignition output I have this same system but I am looking for directions on how to make connections for door locks using the 451 door lock module that came in the box there were no schematics for the locks maybe you can help me on that part thanks. ------------- Do it right the first time, only a doctor can bury his mistakes.
Posted By: eclipse98holla
Date Posted: January 16, 2005 at 6:50 PM
actually i dont know but i can find out from some friends... ill get back to you as soon as i talk to them ------------- Daniel Smith
Posted By: eclipse98holla
Date Posted: January 16, 2005 at 6:51 PM
actually i dont know but i can find out from some friends... ill get back to you as soon as i talk to them. Thanks again i really appreciate your help! ------------- Daniel Smith
Posted By: eclipse98holla
Date Posted: January 16, 2005 at 7:03 PM
what kind of car is it going into? i do know how to wire it for negative because that is how mine is set up. if you have negative locks this is how it goes PURPLE - grounded BLUE and GREEN - neg to locks WHITE/ BLACK and BROWN / BLACK - pos (not used) ------------- Daniel Smith
Posted By: eclipse98holla
Date Posted: January 16, 2005 at 7:11 PM
if you have negative door locks this is how it is wired: PURPLE - grounded GREEN and BLUE - neg to door locks BROWN and WHITE - pos to door locks (not used) ------------- Daniel Smith
Posted By: Falcon 1
Date Posted: January 16, 2005 at 8:01 PM
Hi my locks are positive pulse, anyways was the info I gave you ok? I will find what I need for my installation but if your friends can help I would appreciate it. Thanks. ------------- Do it right the first time, only a doctor can bury his mistakes.
Posted By: eclipse98holla
Date Posted: January 17, 2005 at 2:31 AM
well there are two types of positive pulse locks, type A and type C (type B is negative). What type of vehicle is it? i can tell you how to wire both of them but i need to know which type you have because if you have type C and you wire it for type A you can damage your 451. and also do you have a 451 or a 451M because you may need extra relays depending on what type of locks you have. ------------- Daniel Smith
Posted By: Falcon 1
Date Posted: January 17, 2005 at 3:05 PM
Hi its being installed in a 2000 GMC Sierra pickup. The tech sheet I have for it say the lock and unlock wires require a positive pulse on the wires at the BCM.
-------------
Do it right the first time, only a doctor can bury his mistakes.
Posted By: Falcon 1
Date Posted: January 17, 2005 at 3:06 PM
Did yours come with any instructions you can maybe scan and send? ------------- Do it right the first time, only a doctor can bury his mistakes.
Posted By: eclipse98holla
Date Posted: January 17, 2005 at 3:22 PM
i dont have the directions for mine but i do have this website that i went to. it tells you how to check which type of wiring you have and how to wire it up accordingly: https://www.canbroc.com/support/N429.pdf use this adobe acrobat reader file and go to page 8. this page starts to explain how to wire up your locks. if you have any more questions i might be able to help. ------------- Daniel Smith
|