2003 Mazda 6 relays

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48607
Printed Date: April 27, 2024 at 6:15 AM

Topic: 2003 Mazda 6 relays

Posted By: way2hard2contro
Subject: 2003 Mazda 6 relays
Date Posted: January 25, 2005 at 9:36 PM

I am considering a Viper 791xv. Can anyone that has done an install on a 6 give me an idea how many relays I should have available?

Replies:

Posted By: JWorm
Date Posted: January 25, 2005 at 10:54 PM

3 should do it.
Lock/arm (as well as a 1.4k resistor)
Unlock/disarm
Keysense

Posted By: way2hard2contro
Date Posted: January 26, 2005 at 7:45 AM

Thanks! Is there a standard practice for determining if I will need a relay?

Posted By: KarTuneMan
Date Posted: January 26, 2005 at 7:12 PM

Use an astroflex, and you dont need any!

-------------

Posted By: way2hard2contro
Date Posted: January 26, 2005 at 10:55 PM

Isn't the Astroflex similar to the Compustar? I have thought about going with one of their systems by the reliability, particularly of the remotes, scares me.

Posted By: KarTuneMan
Date Posted: January 26, 2005 at 11:30 PM

The astroflex is bulletproof, built, designed, and tested in O Canada......where its cold as hell. Way up north by the St. Lawrence river.

The transmitters are water proof (the 6 and 5 button one way units) I have seen one that went thru a snow blower and still works. It was beat to hell and worked ,......

All astroflex does is remote start, or remote start with security. No stand alone alarms. They offer 7 models. They are VERY focused, not spreading themselves THIN

-------------

Print Page | Close Window