03 accord alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50019
Printed Date: June 03, 2024 at 7:48 PM
Topic: 03 accord alarm
Posted By: rac0000
Subject: 03 accord alarm
Date Posted: February 13, 2005 at 1:25 PM
i installed a remote start in a 2003 accord ex 4 door and would like to know if i can disarm the oe alarm without going into the driver's door and drilling holes for the wire. i have read some of your posts about the hodl2 ,but would like to know if there is any other option.
-------------
rac0000
Replies:
Posted By: iskidoo
Date Posted: February 13, 2005 at 2:02 PM
All my wire diagrams say you have to go into the door.
Factory Disarm: Driver's door controller ***This module is part of the switch assembly inside the driver's door. You must run 2 wires through the door jamb boot.
Posted By: profuse007
Date Posted: February 13, 2005 at 3:12 PM
on those newer accords, do they still use those harnesses at the hole entry into the shell? i know the newer CL and TL dont have them anymore and its piece of cake to run to it.
if its the case, no drilling required.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
|