Print Page | Close Window

1999 Toyota Corolla remote start/keyless

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50152
Printed Date: April 28, 2024 at 4:21 AM


Topic: 1999 Toyota Corolla remote start/keyless

Posted By: bryansellers
Subject: 1999 Toyota Corolla remote start/keyless
Date Posted: February 15, 2005 at 12:23 PM

I am trying to hook up a keyless entry/remote start in my 1999 toyota corolla. I need a wiring diagram of my car if at all possible. Also, if you have anything else that might help me out, feel free to give it to me.

tbone@getgoin.net



-------------
Bryan M Sellers
Carpe Diem!



Replies:

Posted By: jconnection
Date Posted: February 15, 2005 at 1:36 PM
Constant 12V    white           Ignition switch harness
Ignition #1     BLACK/ white     ignition switch harness
Starter             red             ignition switch harness
Tach Signal     black             at engine control module
Ignition #2     BLACK / YELLOW     ignition switch harness
Accessory     blue/red        ignition switch harness
Brake Light     GREEN / WHITE(+)     at switch above brake pedal

Any question or diference in the color please ask again...




Posted By: thepencil
Date Posted: February 15, 2005 at 1:36 PM


DIRECTWIRE™ WIRING INFORMATION - TOYOTA / COROLLA / 1999 / Remote Start


[PRINT THIS PAGE]


12volts white   +   ignition harness
Starter red   +   ignition harness
Second Starter          
Ignition BLACK/ white   +   ignition harness
Second Ignition BLACK / YELLOW   +   ignition harness
Third Ignition          
Accessory blue/red   +   ignition harness
Second Accessory          
Keysense          
Power Lock blue/black   -   R side of fuse box, wht plug
Notes: The lock wires are about 18 gauge. They will test only by operating the key in the passenger door lock cylinder, not the rocker switch on the door itself.
Power Unlock GREEN / WHITE   -   R side of fuse box, wht plug
Notes: The lock wires are about 18 gauge. They will test only by operating the key in the passenger door lock cylinder, not the rocker switch on the door itself.
Lock Motor blue      drivers kick panel
Unlock Motor red      drivers kick panel
Parking Lights+ green      bottom of fuse box
Parking Lights- lt GREEN/ black      steering column
Hazards          
Turn Signal(L)          
Turn Signal(R)          
Reverse Light          
Door Trigger RED / white   -   instrument cluster or
Notes: Also found at the fuse box. There are at least 5 RED / white wires at the fuse box, some will only pick up individual doors, meter them to find the one that will get all the doors, it will be the one that goes up to the instrument cluster, it is in a 12 pin plug on the back of the fusebox. For domelight supervision use one of the individual door triggers.
Dome Supervision          
Notes: Also found at the fuse box. There are at least 5 RED / white wires at the fuse box, some will only pick up individual doors, meter them to find the one that will get all the doors, it will be the one that goes up to the instrument cluster, it is in a 12 pin plug on the back of the fusebox. For domelight supervision use one of the individual door triggers.
Trunk/Hatch Pin RED / white   -   light in trunk
Notes: On vehicle with the factory alarm, can find these wires at the alarm module above the drivers kick panel.
Hood Pin red   -   hood pin
Notes: On vehicle with the factory alarm, can find these wires at the alarm module above the drivers kick panel.
Trunk/Hatch Release          
Power Sliding Door          
Factory Alarm Arm arms with lock       
Factory Alarm Disarm disarms with unlock       
Disarm No Unlock          
Tachometer yel/grn, RED / blu, gry, or wht   ac   any ignition coil
Wait to start          
Brake Wire GREEN / WHITE   +   brake switch
Parking Brake          
Horn Trigger GREEN/ red   -   steering column
Memory Seat 1          
Memory Seat 2          
Memory Seat 3          
Immobilizer Bypass Module: Required: No Type: N/A Part #: N/A
Notes: N/A



      
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.





-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image




Posted By: jconnection
Date Posted: February 15, 2005 at 1:36 PM
Constant 12V    white           Ignition switch harness
Ignition #1     BLACK/ white     ignition switch harness
Starter             red             ignition switch harness
Tach Signal     black             at engine control module
Ignition #2     BLACK / YELLOW     ignition switch harness
Accessory     blue/red        ignition switch harness
Brake Light     GREEN / WHITE(+)     at switch above brake pedal

Any question or diference in the color please ask again...





Print Page | Close Window