how to program keys

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51234
Printed Date: June 09, 2024 at 2:22 AM

Topic: how to program keys

Posted By: prdjr165
Subject: how to program keys
Date Posted: March 03, 2005 at 5:26 PM

Does anyone know how to program mitsubishi montero sport keys?

Replies:

Posted By: dare_ds69
Date Posted: March 03, 2005 at 7:33 PM

try to put one key in the igniton position wait 5second and then put the second key to on position wait 5 seconds and put key that you want to program put in on position press the brake and start the car

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Posted By: mxxmikexx
Date Posted: March 03, 2005 at 8:03 PM

I thought mitsu was dealer program only posted_image

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106

Posted By: oonikfraleyoo
Date Posted: March 03, 2005 at 8:14 PM

If its a newer Montero it may be like other chyrstlers. Like dare said, put one key in, turn ign. on (dont start), wait for security light to go off. Put 2nd key in, turn ign. on, security light will blink go off and come on, put new key in turn ign. on, horn will honk, your done. If that don't work you need to go to the dealer.

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.

Posted By: ponchsmart
Date Posted: March 03, 2005 at 10:05 PM

Hi everyone,

you guys are correct, but just in case:

1.-obtain 2 programmed keys. 2.-insert first key and turn to on (not run). 3.-switch off and within 7 secondsinsert second programmed key and turn to on. 4.-alarm sistem warning lamp will flash twice. 5.-switch off and withing 7 seconds insert new key and switch on. 6.-alarm sistem warning lamp will illuminate for 3 secons to confirm or flash 3 times to indicateregistration has failed.

Print Page | Close Window