Print Page | Close Window

HORNET 851T

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51692
Printed Date: October 31, 2024 at 7:03 PM


Topic: HORNET 851T

Posted By: alldonenow
Subject: HORNET 851T
Date Posted: March 10, 2005 at 3:44 PM

Good Afternoon,

I have an old HORNET 851T R/S and want to add it to my alarm rather than buy a new R/S. This is a low end model so it has limited features. I want to use an AUX off the alarm to activate it but cannot find on the manual what wire it is.

I know the Rattler and Valet series state in the manual (-) or (+) activation input, however the only wire I can tell may do this is  a wire in th emanual that says "(+) Ignition input to remote start". on the 5 pin remote start ribbon harness.

Has anyone installed one and do you think this is what this wire does?

 Thanks,

      Tom




Replies:

Posted By: ken984
Date Posted: March 10, 2005 at 9:43 PM
There is no reference to an 851t on the DIE site. The standalone remote start addon is a 551t. The activation wire for that is WHITE/ blue its a -. If there is not WHITE/ blue what colors do you have to choose from?


Print Page | Close Window