Print Page | Close Window

2004 Altima Keysense wire?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51820
Printed Date: June 08, 2024 at 8:47 PM


Topic: 2004 Altima Keysense wire?

Posted By: Mobilesecurity
Subject: 2004 Altima Keysense wire?
Date Posted: March 12, 2005 at 6:33 PM

Hopefully somebody can inform me if the 2004 altima's keysense wire needs to be installed to prevent false codes or deletion of the keys from memory. I'm using a universal transpoder typer bypass. Thanks once again for the help in advance

-------------
check twice connect once



Replies:

Posted By: johnnydi77
Date Posted: March 12, 2005 at 7:28 PM
It's RED / blue and turns into black red found in the ignition harness.

-------------
John J. DiStefano Jr.



Posted By: Mobilesecurity
Date Posted: March 12, 2005 at 7:52 PM

PLEASE PLEASE PLEASE

If you respond to my post read my post fully before u respond because i already have that information.

I'm asking if i need to interface with the keysense wire to prevent the security system from locking down the car or possible deletion of the keys.



-------------
check twice connect once



Posted By: johnnydi77
Date Posted: March 12, 2005 at 9:24 PM
Ok I read it fully now. The keysense wire was already installed by the nissan manufacturer. If your asking if you need to interface it.  The answer is no.

-------------
John J. DiStefano Jr.



Posted By: johnnydi77
Date Posted: March 12, 2005 at 9:31 PM
One more thing....If that vehicle has auto lights you have to interupt the auto light wire.  If you don't the auto lights will stay on and won't shut off if you shut down the remote start via remote control.  Disregard if it doesn't have auto lights.

-------------
John J. DiStefano Jr.



Posted By: Mobilesecurity
Date Posted: March 12, 2005 at 11:52 PM
How would I interface with the autolights?

-------------
check twice connect once



Posted By: johnnydi77
Date Posted: March 14, 2005 at 8:03 PM
you have to open up the GREEN/ YELLOW auto light wire with a relay. I use a rearm output to do this.

-------------
John J. DiStefano Jr.


Print Page | Close Window