Print Page | Close Window

sec-8049

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5226
Printed Date: October 31, 2024 at 5:58 PM


Topic: sec-8049

Posted By: kenaustin
Subject: sec-8049
Date Posted: November 07, 2002 at 8:20 PM

I need a wiring diagram. I got the one for the 8063 and wondering if they are the same. Jeff e-mailed me one but my computer wouldn't open up the attachment. If you could send it through here though, or anyone else, I can open them. Thanks.



-------------
Back yard specialest



Replies:

Posted By: Velocity Motors
Date Posted: November 08, 2002 at 1:20 AM

https://www.the12volt.com/downloads/file.asp?ID=286 This is for the 8063

In your header you put 8049 ? Do you need that one too ?



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: kenaustin
Date Posted: November 08, 2002 at 6:44 PM
Someone already emailed me the 8049 which is what I need. But now installing it I have a few questions. I know on the starter cut relay I have too cut the wire and hook up to eather end of it with the RED / yellow wire off the relay going too the starter and the red wire off the relay going too the key. But what my question is, the Battery line off the 8049 (yellow), do I cut the constant 12V wire in the vehicle or do I splice ito it? And the Ingnition wire off the 8049 (red) do I cut the ignition wire on the vehicle or do I splice into it? And last but not least, where do I hook up the parking light flash. Outside of all of that, I got the rest pretty much figured out.

-------------
Back yard specialest




Posted By: Velocity Motors
Date Posted: November 09, 2002 at 11:51 AM
All wires for connection ( other than the STARTER wire ) you will need to splice into. The starter wire you need to cut to install a relay . The parking light wire you need to attach to the wire that tests (=) when you turn on the parking lights. What car ( year, make & Model ) is this and I'll give you the wire color and location for it.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA





Print Page | Close Window