96 integra, Hornet 725t, Door locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53792
Printed Date: May 16, 2024 at 11:27 AM
Topic: 96 integra, Hornet 725t, Door locks
Posted By: justateg
Subject: 96 integra, Hornet 725t, Door locks
Date Posted: April 12, 2005 at 5:23 PM
I have a Hornet 725t and it has been acting weird lately. The car is a 96 integra. The problem is as soon as i shut the door it locks without me touching anything. It will not arm, but it locks the doors. then when you hit button one it will arm, and then hit button one again it disarms and unlocks. It did not do this when i first hooked it up, it just started. Has anyone experienced this or is this something in the programing because the wiring hasnt changed any i checked it this weekend -------------
Replies:
Posted By: hitec
Date Posted: April 12, 2005 at 9:30 PM
can you try the door switch only.Instead of slam the door closed.
Posted By: justateg
Date Posted: April 12, 2005 at 10:10 PM
this isnt slamming the door in fact it is lightly shutting the door. i dont understand what your trying to say
-------------
Posted By: hitec
Date Posted: April 12, 2005 at 11:21 PM
I just want to know if is there any loose wires.If not Then try to reprogramed it.Or a new one!
Posted By: Velocity Motors
Date Posted: April 13, 2005 at 12:02 AM
Where did you grab the wires at for the door locks ? In the driver kick panel or at the door lock switch ? Sounds like the lock wire is grounding out somewhere and causing the lock situation to happen. You can test the lock wire and see if it grounds out when you shake the car or move wires around underneath the dash. If it does ground out, then you will need to find where the wire is grounding out or wire in a new wire. ( choose the latter of the two as it will take les time. ) ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: justateg
Date Posted: April 13, 2005 at 2:09 PM
i connected them under the kick panel. ill look into it this was the only place i used the splice connectors so this very well could be. thanks for the help
-------------
Posted By: KarTuneMan
Date Posted: April 13, 2005 at 10:27 PM
passive locking?
-------------
Posted By: justateg
Date Posted: April 14, 2005 at 10:06 PM
passive locking should lock the doors 30 seconds after it sees the last door shut, this is istantanous as soon as you start to shut the door it starts the locking sequence and his locked by the time it shuts.
-------------
|