DEI Siren

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53803
Printed Date: May 09, 2024 at 4:47 AM

Topic: DEI Siren

Posted By: vt_hokie2008
Subject: DEI Siren
Date Posted: April 12, 2005 at 7:42 PM

Is there any way I can make my siren only one tone? I think it can be done with a bitwriter, but I don't have one and don't want to invest in one. Someone I've talked to on another forum said that you cut wire loops in the siren or something, but I don't want to go cutting wires until I know more about it.

THANKS!

Replies:

Posted By: auex
Date Posted: April 12, 2005 at 8:01 PM

Well, see the 2 screws in the cone. Take those out, then remove the plastic plug where the wires go into the siren. Then slide the speaker out of the cone. There will be a circuit board screwed to the siren, it is where the wires attach. You have to cut some resistors or traces. I don't have the specifics of which to cut but I will look for the info.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: vt_hokie2008
Date Posted: April 12, 2005 at 9:04 PM

thanks! I don't really like having the six tones going off.