791xv ground when armed output & starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53820
Printed Date: May 08, 2024 at 2:56 PM

Topic: 791xv ground when armed output & starter

Posted By: Justducttapeit
Subject: 791xv ground when armed output & starter
Date Posted: April 13, 2005 at 1:49 AM

I have a 791xv by VIPER, do I connect the "GROUND WHEN ARMED OUTPUT" to the starter wire? Thus it provides a ground for the starter "when armed"? So it won't work? That is my guess, but I'm most likely wrong. The more I think about it thats the only place I can think of. I tried just grounding the ground when armed output and it just didn't change anything. Everything works, except the starter works when it's armed and the anti-grind doesn't work. Thanks

Brady

-------------
Brady Anderson
1994 Honda Accord EX
Pocatello, ID

Replies:

Posted By: dare_ds69
Date Posted: April 13, 2005 at 6:52 AM

if you read the instructions u should know that the viper came with anti-grind relay done for u, the orange wire don't use it, use just green and purple fron the satelite relays. purple goes to motor side and green goes to key side.

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Posted By: Justducttapeit
Date Posted: April 13, 2005 at 10:39 AM

ok, what exactly does "key side" mean? and "motor side"?My anti grind doesn't work though...it may have something to do with my purple and green wires tho. Thanks

-------------
Brady Anderson
1994 Honda Accord EX
Pocatello, ID

Posted By: vt_hokie2008
Date Posted: April 13, 2005 at 12:09 PM

you cut the starter wire and put the green on the end of the wire closest to the key and the purple goes on the other side of the cut wire.