Viper 791 in 2000 Monte Carlo SS

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54259
Printed Date: May 20, 2024 at 2:52 AM

Topic: Viper 791 in 2000 Monte Carlo SS

Posted By: blade1901
Subject: Viper 791 in 2000 Monte Carlo SS
Date Posted: April 19, 2005 at 9:22 PM

Im getting ready to tackle an install of a Viper 791 in my 2000 Monte Carlo SS. I was wondering if i would need to use relays on the doors, trunk release, parking lights or anything else. Any help would be greatly appreciated.

Replies:

Posted By: Bmnicolosi
Date Posted: April 20, 2005 at 10:14 AM

you need a realy for the trunk release, and you will either need two relays and reistors to do the passlock bypass or you will need a bypass piece made by dei.

-------------
If you say "I already know how", don't ask me a single question.

Posted By: blade1901
Date Posted: April 25, 2005 at 8:09 PM

Ok so i got my alarm installed ok. Now im wondering if there's a way to either trigger the factory alarm when the viper one goes off, or make the horn blow along with the siren. Thanks in advance.

Print Page | Close Window