Black Widow BW10000 door unlock issue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56610
Printed Date: June 04, 2024 at 11:10 PM

Topic: Black Widow BW10000 door unlock issue

Posted By: hagmanti
Subject: Black Widow BW10000 door unlock issue
Date Posted: May 30, 2005 at 10:09 AM

Test the orange wire (make sure it's getting 12V) and the white wire (should pulse 12V while unlocking). Are there any fuses on these wires? If so, check them.

Try putting 12V and ground both ways across the actuator wires and make sure they actually lock and unlock the doors correctly...

A coil on the relay could possibly be bad, but it's about 1000:1 against. Much more likely that you have a bad connection somewhere...

Me

Replies:

Posted By: mo12v
Date Posted: May 31, 2005 at 8:10 AM

Should check connections again & be sure U R getting Reversal Ground on both PIN 30s...........
Also be sure the Negative Trigger is not reversed on 87a & 86

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Print Page | Close Window