K9-mundial-2, 98 toyota camry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57527
Printed Date: June 03, 2024 at 9:56 AM

Topic: K9-mundial-2, 98 toyota camry

Posted By: fragile
Subject: K9-mundial-2, 98 toyota camry
Date Posted: June 12, 2005 at 7:48 AM

i am installing the k9-mundial-2 security system on a 1998 toyota camry but everytime i connect the relay for the starter kill, it hums then sets off the alram. any ideas on how to correct this problem. i have changed the relay and also the brain of the system but the problem remains... so my system for now only opens and closes the door but no anti-carjacking feature can be turned on.

-------------
K9-Mundial-2 installation problems

Replies:

Posted By: mo12v
Date Posted: June 12, 2005 at 10:29 AM

How do U have the Relay wired ?

https://www.the12volt.com/relays/page2.asp

Normally Closed Starter Kill Relay

The basic starter kill relay diagram shown below, breaks continuity of the lead from the ignition switch to the starter motor (or in some cases i.e.; Ford, to another relay), when the alarm is armed and the ignition is turned on. This is the most commonly used application for disabling the starter. Click here for another starter kill diagram.
posted_image

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: fragile
Date Posted: June 21, 2005 at 2:26 PM

I am trying to install K-9 Mundial system in my car and I am having a hard time setting it up as I am certain that I am doing something wrong as I keep getting a humming sound from the relay when its connected. I am in need of a ignition wiring for a 1998 Toyota Camry so I can see where I am going wrong. Thanks

-------------
K9-Mundial-2 installation problems