Print Page | Close Window

Viper 791xv ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58175
Printed Date: June 10, 2024 at 12:03 PM


Topic: Viper 791xv ?

Posted By: uniball
Subject: Viper 791xv ?
Date Posted: June 21, 2005 at 11:43 PM

Hello, I have just purchased a dei viper 791xv for my 2 door 03 Dodge Ram. When I opened the box I saw no relays. After reading the install instructions I found out that it has a remote satellite relay module instead of the usual relays I'm use to. Is this TRUE that  I will not need any relays (dei 610t) for this install? That would be SWEET!!! I will be installing the following DEI accessories 506t,507t,513t,520t, & 530t at the same time. Any Helpful tips would be GREATLY appreciated!!! Thanks, uniball




Replies:

Posted By: nava94
Date Posted: June 22, 2005 at 12:12 AM

wooo to many t's in your install.Yep the satellite relay module has miniture relays inside that make the install easy.the 507t make sure you leave the motion setting on low cuz if you set it on high then your going to have a lot of falsing. the 530t make sure you install the module under the dash or at the driver kick so it won't give you no problems in the future.do not install the 530t in the driver door cause you will have problems with the module due to vibration,water,etc. make sure you follow the instructions on the wiring schematic for your remote start on this truck so your install will turn out good.





Posted By: uniball
Date Posted: June 22, 2005 at 3:31 AM
nava94, Thanks or the info/tips! posted_image





Print Page | Close Window