alarm siren
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58267
Printed Date: May 20, 2024 at 4:02 PM
Topic: alarm siren
Posted By: 44dawgs
Subject: alarm siren
Date Posted: June 23, 2005 at 4:15 PM
anyone knows what are the two cables on the siren on the viper alarm? i'm trying to make the chirps louder , in the manual says it can be done, but it doesn't say how. the alarm is a viper, i can't remember the exact model, it's 650 something. any help would be great, thanks!!!
Replies:
Posted By: auex
Date Posted: June 23, 2005 at 4:19 PM
To make the chirps louder you cut the loop of black wire on the siren itself.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: 44dawgs
Date Posted: June 23, 2005 at 4:22 PM
so the black one... the other one is black w/ a white stripe, what's that for? thanks a lot mate!
Posted By: jhgraham
Date Posted: June 24, 2005 at 2:57 PM
I would also like to increase the volume of my siren. I have an Audiovox AS-9903. Does cutting the black wire on this siren also increase the volume? If so do you know if it is the right or left black wire as shown in the picture?
https://www3.sympatico.ca/bmw328ia/mod_siren.htm
Maybe a new one is easier. Any recommendations?
|