Print Page | Close Window

saab 92x factory alarm w/ turbo timer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58481
Printed Date: June 02, 2024 at 9:16 AM


Topic: saab 92x factory alarm w/ turbo timer

Posted By: maxima96
Subject: saab 92x factory alarm w/ turbo timer
Date Posted: June 28, 2005 at 12:40 AM

I need some advise on a 2005 92X with factory alarm (equivalence to Subaru WRX turbo).  I am in the middle of installing a Blitz DC III turbo timer.  My goal is to set the alarm while the turbo timer is counting down.  I saw from another web site whom someone has done it with cutting two wire on his 2002 WRX.  The 1st one is to cut the dark GREEN/ black at the keyless module(alarm) which sits on top of the fuse block module.  The 2nd wire to to cut is the grey wire which belongs to a module(sensor???) that reside inside the (parking) hand brake console. 

would someone know about this installation could advise rather this would work?  Since i don't know the nature of those wires, i am hesitate to follow it blindly.  if someone has some wiring diagram sort of related to the factory Subaru alarm, i think that would solve my doubts.   thanks very much for your time for reading.




Replies:

Posted By: dare_ds69
Date Posted: June 28, 2005 at 6:23 AM
well the only way to keep the factory alarm during turbo timer is find the factory alarm module and cut the ignition wire that way the brain is not going to see 12v and is going to be on during the turbo time.

-------------
how own your mind, control your life.
MECP certified. always use a DMM




Print Page | Close Window