Print Page | Close Window

Actuator/reverse polarity?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58738
Printed Date: May 28, 2024 at 11:06 PM


Topic: Actuator/reverse polarity?

Posted By: playboy00786
Subject: Actuator/reverse polarity?
Date Posted: July 02, 2005 at 5:02 PM

I recently bought a 2 wire door actuator and 2 relays so i could set up the reverse polarity. I got it all set up exactly how it shows on the diagram on this web site and every time i either put the fuse in, touch the fused 12+V to a constant 12+V, or ground it after i have it set up the fused 12+V the fuse always blows. What am i doing wrong



Replies:

Posted By: swamprat323
Date Posted: July 02, 2005 at 6:07 PM
Make sure you have SPDT relay. the middel pin will be 87a.



Posted By: playboy00786
Date Posted: July 02, 2005 at 6:54 PM
I do but the fuses just keep blowing



Posted By: swamprat323
Date Posted: July 02, 2005 at 7:05 PM
how do u have them wired up. waht amp is the fuse.



Posted By: playboy00786
Date Posted: July 02, 2005 at 7:48 PM
it is a 30 amp fuse



Posted By: playboy00786
Date Posted: July 02, 2005 at 7:56 PM
posted_image
this is how i have it wired



Posted By: thepencil
Date Posted: July 02, 2005 at 8:10 PM
That's the correct way you have it wire up. 30 amp fuses is more than enough to do the job. Now look for a pinch wire. You may have put a screw in between the wire unknowingly. Run a continuity test on the wire. Yes, test the actuator too.    

-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image



Posted By: playboy00786
Date Posted: July 03, 2005 at 2:53 PM
how do i do a continuity test?



Posted By: thepencil
Date Posted: July 04, 2005 at 10:23 AM
Using your meter. What you are doing is testing to make sure the wire are not grounded to the chassis.

-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image


Print Page | Close Window