concept 100
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58804
Printed Date: April 30, 2024 at 11:48 AM
Topic: concept 100
Posted By: smythford
Subject: concept 100
Date Posted: July 04, 2005 at 9:17 AM
i have a clifford concept 100 but no istructions to install it can any one help please
-------------
mjs
Replies:
Posted By: smythford
Date Posted: July 04, 2005 at 10:03 AM
not sure prehaps you can help me, i've intalled the alarm but it does not cherp at all not even when the alarm is going off. also some times as soon as you lock it up the alarm goes off straight away for no reason, well the lights go off, cherp don't work does it HELP!!!
-------------
mjs
Posted By: joe_1
Date Posted: July 04, 2005 at 12:39 PM
Posted By: smythford
Date Posted: July 04, 2005 at 12:44 PM
nice one for wiring diagram you wouldn't beleive how long i've tried to get on. i've only got front door pin and back door as its a van. will this make a big difference ------------- mjs
Posted By: joe_1
Date Posted: July 04, 2005 at 12:49 PM
only if they are making a connection all the time this will be the reason that it goes off if this is the case check the diagram and compare to your connections use a multimeter and check carefully that all connectios are where they should hope you get it sorted probably something that you have missed.
Posted By: smythford
Date Posted: July 04, 2005 at 1:52 PM
i've checked all my connections with diagram all seems to be ok but still no cherp. do you think the siren might have a fault. is it possible to get another one
-------------
mjs
Posted By: joe_1
Date Posted: July 04, 2005 at 4:18 PM
yeh try another siren see what happens im having the exact same problem with a concept 300 the alarm sounds after arm and it dont make the arm and disarm chirp i have sorted the alarm sounding that was due to faulty bonet switch but cant find out why it dont make the chirps i have pluged it into the computer and had a look on cliffnet it is turned on so i aint got a clue
Posted By: smythford
Date Posted: July 04, 2005 at 7:52 PM
ok cheers ill try another siren and see what happens. any siren will do for wont it. if i do need another one do you no where i can get one from. does it have to be of a concept 100 or will a 300 do . thanks for all your help.
-------------
mjs
Posted By: joe_1
Date Posted: July 05, 2005 at 11:47 AM
yeh they are the same 6 tone siren i think so you should be ok
Posted By: smythford
Date Posted: July 06, 2005 at 4:58 PM
nice one
-------------
mjs
|