Print Page | Close Window

05 BMW 325 CI Keyless upgrade

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58813
Printed Date: May 10, 2024 at 5:24 AM


Topic: 05 BMW 325 CI Keyless upgrade

Posted By: aemobile
Subject: 05 BMW 325 CI Keyless upgrade
Date Posted: July 04, 2005 at 12:02 PM

Hi I recently tried to install DEI AM-1 keyless entry upgrade into the BMW 325 ci, I was told by DEI tech support   that you cannot install a keyless entry upgrade to the factory key remote. I program the system to learn the door lock polarity, but it will only work once in while, when the vehicle is started, it some how loses the program, will not chirp and the led will not flash. I was told that the door locks motor wire are progressive and alternates polarity, is this true? Has any able to install keyless upgrade to this BMW, and if so is there some trick or do i need to the one of doors for motor wires?   
Would greatly appreciate any feedback or suggestions
Thank you for your time



Replies:

Posted By: joe_1
Date Posted: July 04, 2005 at 12:34 PM
good luck with any info i have asked people about the new bmw systems no one can give me any info




Posted By: ccroadshop99031
Date Posted: July 05, 2005 at 10:31 AM
if its a new one e46 body style the dealer plugs the computer into the car and sets the drives priority w/ that , so when the computer sees a negative pulse on unlock wire, it unlock all doors or just the drives door depending on what its programmed to do    





Print Page | Close Window