Switch for lecky windows.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59349
Printed Date: May 12, 2024 at 10:57 PM

Topic: Switch for lecky windows.

Posted By: iamscreech
Subject: Switch for lecky windows.
Date Posted: July 13, 2005 at 9:45 AM

I need a switch for when my window bottoms out (or top) it breaks the circuit to stop the modor from burning out.

So what i need is not just a micro switch, because if the window turns that off i can't operate it to go back up, because the motor needs both wires (up and down) to be connected. So i need a switch that it can push to knock out the circuit for a second and then automaticaly goes back on, then i can wind up the window, which lets the switch go and can all happen again.

I hope you get what i mean, it's difficult for me to explain

Is there anyone who can help me.

Many Thanks in advance

Mark.

Replies:

Posted By: iamscreech
Date Posted: July 13, 2005 at 1:58 PM

got one touch moduals for it, but i need to tell it when its finished, cos when it reaches the bottom it wants to keep going.

Posted By: Sad, little man
Date Posted: July 13, 2005 at 4:57 PM

What you're looking for is some kind of circuit breaker. I know many power window systems use them to protect the motor from burning out if someone holds the switch down too long. Would that work?