998t bitwriter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60064
Printed Date: June 11, 2024 at 7:33 AM

Topic: 998t bitwriter

Posted By: godshandkiller
Subject: 998t bitwriter
Date Posted: July 25, 2005 at 6:46 PM

i just bought one of these off ebay.no instructions,how do yo use it.i have a python 881xp installed in my 2000 mustang gt.i just wanted to change a few things in my alarm then i was going to put it back on ebay. any help would be appreciated

Replies:

Posted By: godshandkiller
Date Posted: July 25, 2005 at 6:51 PM

godshandkiller wrote:

i just bought one of these off ebay.no instructions,how do yo use it.i have a python 881xp installed in my 2000 mustang gt.i just wanted to change a few things in my alarm then i was going to put it back on ebay. any help would be appreciated

it has version 1.3

Posted By: swamprat323
Date Posted: July 25, 2005 at 6:57 PM

well you need to upgrade the version they are now at 2.0.
the manural is in the downlaod sections but not much to it.

Posted By: godshandkiller
Date Posted: July 25, 2005 at 7:16 PM

i plugged it in like the instructions said and it said not a valid system.

Posted By: swamprat323
Date Posted: July 25, 2005 at 7:18 PM

you need to upgrade the version chip. for 881 u need 1.4 or 1.5. as of now they are at 2.0.

Posted By: godshandkiller
Date Posted: July 25, 2005 at 7:21 PM

where can i get it upgraded and how much will that cost

Posted By: swamprat323
Date Posted: July 25, 2005 at 8:59 PM

autotechs

Print Page | Close Window