Print Page | Close Window

Nissan Second Starter w/Anti-Grind

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60649
Printed Date: May 31, 2024 at 11:25 PM


Topic: Nissan Second Starter w/Anti-Grind

Posted By: craign8
Subject: Nissan Second Starter w/Anti-Grind
Date Posted: August 04, 2005 at 12:28 AM

I'm currently installing a compustar remote start and alarm and wiring the second starter relay of an 05 Maxima.

If memory serves me correctly I use the standard pre-wired relay for Starter wire #1 (this relay is wired for anti-grind, starter kill, and starter), and just wire a second relay off of the (-) starter output wire from the brain with a seperate 12 volt.

If I remember correctly if starter wire #1 has been interupted, then it doesn't matter if key is inserted and starter wire #2 is energized.  (ie...Anti-grind and starter kill options do not need to be wired to starter wire 2)  Just wonderin if some nice installer could verify my memory for me...

Thanks in advance

-Craig




Replies:

Posted By: cosmoworks
Date Posted: August 04, 2005 at 11:16 AM
Yep, sounds right.


Print Page | Close Window