Clifford Smartwindows II
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61039
Printed Date: October 31, 2024 at 6:52 PM
Topic: Clifford Smartwindows II
Posted By: OwenZ
Subject: Clifford Smartwindows II
Date Posted: August 09, 2005 at 10:36 PM
Hi everyone,
My 1991 turbo 300zx has this module but is not hooked up. Can anyone point me to a diagram? All I could find was the Smartwindows IV which looked slighty different.
Thanks,
Owen
Replies:
Posted By: dare_ds69
Date Posted: August 10, 2005 at 6:00 AM
the module was made by clifford, now clifford is part of DEI is hard to get the instructions for it. sorry ------------- how own your mind, control your life.
MECP certified. always use a DMM
Posted By: cosmoworks
Date Posted: August 10, 2005 at 10:16 AM
OwenZ, post up your email address, and I'll send it to you.
Posted By: OwenZ
Date Posted: August 10, 2005 at 10:34 AM
Sweet, thanks! v8z@earthlink.net Owen
Posted By: Goudtik
Date Posted: August 11, 2005 at 4:59 AM
cosmoworks wrote:
OwenZ, post up your email address, and I'll send it to you.
Could you please send me the wiring diagram for the Clifford Smartwindows II? I'd really appreciate it. My email: dennis.helleman@hccnet.nl Thanks!
Posted By: cosmoworks
Date Posted: August 11, 2005 at 10:25 AM
^^^ Done and done.
Posted By: OwenZ
Date Posted: August 11, 2005 at 11:28 PM
Received, thanks a lot!
Owen
Posted By: Guss
Date Posted: August 16, 2005 at 8:01 PM
Hi, I got the smart windows II but I have an autopage alarm installed on my 98 chevy, u know if I can use the smart windows my alarm? and if i can, can u send me the wiring diagrama for it?, please guss_rg@yahoo.com thak you, I appreciate any help Guss
Posted By: cosmoworks
Date Posted: August 17, 2005 at 12:55 PM
^^ Done.
Posted By: Guss
Date Posted: August 22, 2005 at 4:24 PM
I got it, thanks Owen Does anyone have the installation guide for the smartwindows II? thanks Guss
Posted By: Guss
Date Posted: August 22, 2005 at 4:25 PM
I forgot something, the module I got has some connections on the top, do I have to connect those also? thank u Guss
|