lexus is300 door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62230
Printed Date: June 14, 2024 at 4:26 AM

Topic: lexus is300 door locks

Posted By: IIrjII
Subject: lexus is300 door locks
Date Posted: September 05, 2005 at 12:33 PM

Hello. I am working on a 2002 Lexus IS300. I've got everything done but the door locks. I got the doors to lock, but it won't unlock, and yes i used document 1070. Just don't know if I did it right. Has anyone done this vehicle? I found the wires in the door panel, but when I went to the drivers kick panel I couldn't find it. Can anyone give me precise location of the wires? thanks

Replies:

Posted By: IIrjII
Date Posted: September 05, 2005 at 3:42 PM

anyone?????

Posted By: daze
Date Posted: September 05, 2005 at 4:42 PM

did you use relays or are you using the lock and unlock wires from the alarm ?

Posted By: IIrjII
Date Posted: September 05, 2005 at 5:47 PM

I am using relays and the lock ulock wires from alarm

Posted By: ringojam
Date Posted: September 05, 2005 at 7:32 PM

On the lexus i go to door wires in the door,because they are controlled by the key locking and unlocking from out side.There is a way you can cut them and re join them and make them - pulse but i suggest using a directed model 451m door lock relay assembly .

Posted By: IIrjII
Date Posted: September 06, 2005 at 7:04 PM

How would I wire the 451m? Five wire or do I just hook it up like the 1070 diagram? Thanks

Posted By: IIrjII
Date Posted: September 07, 2005 at 5:25 PM

Does anyone know how to wire the 451m for the lexus is 300?

Print Page | Close Window