viper 791 xv remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62354
Printed Date: June 10, 2024 at 11:18 AM
Topic: viper 791 xv remote start
Posted By: ty
Subject: viper 791 xv remote start
Date Posted: September 07, 2005 at 6:37 PM
I just got done installing this alarm into my 91 crx si, the only problem is the remote start is not working. I heard you can't do remote starts on manuals for safety reasons, but if I ground the neutral safety switch it should still work right? I've connected the 12+ constant, the ignition, and the starter wire, grounded the nss, and brake light switch, and still nothing. Any ideas, oh yeah and the clutch is bypassed already so I don't need to engage clutch to start vehicle with keys. I have not hooked up the tach wire but that is optional right? Thanks.
Replies:
Posted By: mo12v
Date Posted: September 07, 2005 at 7:38 PM
Does it attempt to CRANK?
If NOT......Have you metered the Start Wire?
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: Teamrf
Date Posted: September 07, 2005 at 8:12 PM
You have to have the tach learned or voltage sense programmed or it won't do anything.
-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
Posted By: craniumvibratio
Date Posted: September 07, 2005 at 11:31 PM
Check check and re check all of your connections.
Posted By: chungo
Date Posted: September 07, 2005 at 11:36 PM
Posted By: ty
Date Posted: September 08, 2005 at 1:35 AM
ok, it does not crank, it says it is starting on the remote though. I will hook up the tach and learn it and also check all the connections, I used the splice taps so maybe I will just strip the wire down and just do it the right way and solder all the connections, I guess I was being lazy. And it is not the hood pin, and I haven't metered the starter wire, what would this accomplish mo12v? I am not being sarcastic I am really serious? Thanks for all the input guys keep it coming.
Posted By: ty
Date Posted: September 08, 2005 at 2:57 AM
also I didn't hook up the accessory wire because I thought that this is just for the climate system and I don't really care about warming up my car, but anyway now that I think about it I'm guessing this wire needs to be hooked up as well. ???
|