Print Page | Close Window

95 mazda millenia

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=62935
Printed Date: May 19, 2024 at 2:34 PM


Topic: 95 mazda millenia

Posted By: domiyork
Subject: 95 mazda millenia
Date Posted: September 19, 2005 at 9:56 PM

hi,

having a hard time getting the factory alarm to turn off on this vehicle, have the door locks working ope and close thru a 1 k resistor works fine when the door open the factory alarm gets actived, pls help. Can i send a positive pulse to the key sense wire to the turn the alarm off?




Replies:

Posted By: mo12v
Date Posted: September 19, 2005 at 10:03 PM

OEM Alarm DisarmLIGHT GREEN/ RED(-) DRIVER KICK PANEL *

* Ground Pulse Will Generate From Trunk Key Switch

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: domiyork
Date Posted: September 19, 2005 at 10:11 PM

thanks,

But look for this wire could not locate , does it rest at Positive? and to test  from the trunk with the key?  




Posted By: mo12v
Date Posted: September 19, 2005 at 10:15 PM

Wire is there...........
Yes.......Turn Key to test with Meter

ALSO

Keysense wire........blue / YELLOW
Using the status output to trigger this wire during remote start will disarm the alarm without unlocking the doors.



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: domiyork
Date Posted: September 19, 2005 at 10:27 PM

thanks,

I will give a try tomorrow when customer comes back if we open, we are going thru another storm.  


Print Page | Close Window