Old Valet 552T program switch wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65293
Printed Date: May 31, 2024 at 9:01 PM
Topic: Old Valet 552T program switch wire
Posted By: randman1
Subject: Old Valet 552T program switch wire
Date Posted: October 30, 2005 at 10:12 AM
I won a Valet 552T in a raffle. It did not come with an installation manual but the pin outs were labled on the back cover. There is no wire labled "programming switch" nor can I find the correct manual on this forum. I have found links to install manuals for a 552T but it certainly doesn't look like what I have.
The unit has a 10 pin harness, 3 pin lock/unlock harness and the relay harness. That's it. The manuals linked to from this forum show a couple more plug in harnesses including the program switch.
What's the deal with this unit?
Replies:
Posted By: extreme1
Date Posted: October 30, 2005 at 11:23 AM
what's the date code on the bottom of the unit, it's the two dials embossed into it.
sounds pretty old, I'm thinking 1st or 2nd generation 552
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: randman1
Date Posted: October 30, 2005 at 11:39 AM
The date code is 4/97.
I'm beginning to think that i should just by a new one.
Posted By: extreme1
Date Posted: October 30, 2005 at 12:28 PM
clicky------------- Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: randman1
Date Posted: October 30, 2005 at 12:45 PM
Thank you very much. 
|