Print Page | Close Window

Valet 552T Remote Start, Disable

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67549
Printed Date: May 31, 2024 at 5:41 PM


Topic: Valet 552T Remote Start, Disable

Posted By: rogeremerick
Subject: Valet 552T Remote Start, Disable
Date Posted: December 03, 2005 at 11:59 AM

I bought a used  truck with the VALET 552T system installed.  What is the easiest way to completely disable the system so the truck starts as if it were not installed?  Hopefully I can just disconnect a wire from battery for example.  I don't want the system to continue to draw power in any way, or interfere with the truck's operation.  Thankyou very much - Roger



Replies:

Posted By: Geeque
Date Posted: December 03, 2005 at 12:39 PM
U should be able to just remove the 10A fuses and that will disable the RS.

-------------
Gary Kline
MECP Master Technician




Posted By: rogeremerick
Date Posted: December 03, 2005 at 5:19 PM
I've looked through the owner's manual and the wiring manual,  but cannot find any mention of a fuse.  I also looked over the installed hardware, and can find no fuse.  Where do you think it is?  Can I disconnect the 12PIN H1 Primary Harness ribbon cable which appears to contain the Power Input and accomplish a complete shutdown without affecting my truck operation? Thanks.




Posted By: cntrylvr79
Date Posted: December 03, 2005 at 8:27 PM
yeah if you disconnect those youll be al good no more remote start.  Out of curiousity why do you want to disable the system.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer




Posted By: rogeremerick
Date Posted: December 04, 2005 at 1:50 PM
I want to disconnect because I don't need it.  It adds unreliability to my vehicle, just one more thing to go wrong.  Plus the battery has been mysteriously been loosing its charge.  I don't want to have to rely on a remote transmitter, just a key.





Print Page | Close Window