Print Page | Close Window

2000 F150 remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67914
Printed Date: June 09, 2024 at 8:09 AM


Topic: 2000 F150 remote start

Posted By: jweld97
Subject: 2000 F150 remote start
Date Posted: December 07, 2005 at 7:04 PM

I have a 2000 F150 with a jkrs3 r/s and a xk04ford bypass. My problem is that it will turn over but won't remote start. When I go into the diagnostics, it says there is a low or no tach signal and yet I have programmed and stored the tach rate according to install instructions. I first was using just 1 tach wire when it did this so I wired in a multi coil pack adapter, diode isolated, and it still does it. Any advice or input would be appreciated. 



Replies:

Posted By: alpinejedi
Date Posted: December 07, 2005 at 7:56 PM
 I dont know what kind of alarm you have but it might have some kind of engine check that you can turn off.  I had to do that once on ford explorer because the rpms drop to low on remote start ,the alarm thought there was a problem so it wouldnt start.

-------------
Chad
Basic certified
Install Sr. at Best Buy




Posted By: jweld97
Date Posted: December 07, 2005 at 8:34 PM
I don't have any alarm, factory or otherwise.




Posted By: jacqueslacombe
Date Posted: December 08, 2005 at 2:32 AM
Hi! you can find a good tach signal dehind the intrument cluster the wire color is WHITE/ pink or I think you can find it top left driver kick is't in a big bundle of wire

-------------
cocolaboy





Print Page | Close Window