alpine sec-100s alarm remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68084
Printed Date: May 19, 2024 at 4:42 AM

Topic: alpine sec-100s alarm remote

Posted By: cupah20
Subject: alpine sec-100s alarm remote
Date Posted: December 10, 2005 at 3:11 PM

just need to know what setup i need, to get my second alarm remote to work. my 'regular use' remote ran out of battery one day, so i tried using the second one & wouldn't work. had to take the battery & put in the 'regular use' remote to disarm my alarm. is there some sort of setup that i need to do first to get the second remote to work?

car: '03 mitsubishi lancer
alarm: alpine sec-100s

Replies:

Posted By: candy&chrome
Date Posted: December 11, 2005 at 12:21 PM

with car disarmed turn ignition on while pressing your valet momentary button 3-5 times then the l.e.d. on your dash will start to flash quickly, then press the blue buttom on each remote one after the other, this will learn them both. after your done let go of the button and take the key out of the ignition and try the system with each remote.

hope i could help.

-------------
canada's cold eh.

Print Page | Close Window