2001 Sebring, remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68220
Printed Date: May 11, 2024 at 1:14 PM
Topic: 2001 Sebring, remote start
Posted By: Geeque
Subject: 2001 Sebring, remote start
Date Posted: December 12, 2005 at 3:59 PM
Hey all, I did a 2001 Chrysler Sebring, installed an Avital 4100 remote start, I tried hooking up the power trunk relaese to the unit and I know its a five wire set-up, but when I hooked everything up it didn't work anyone know why? 86-87 to 12 volts via a 10 amp fuse, 85 (-) output from rs, 87a to motor side of trunk release, and 30 to switch or bcm side of trunk release. Did I miss something? Also, upon remote starting the vehicle a few times, the airbag light came on, did I miss an Ignition wire or an Accessory wire?
-------------
Gary Kline
MECP Master Technician
Replies:
Posted By: chris354
Date Posted: December 12, 2005 at 6:43 PM
30 to motor 87a to switch.
Posted By: redpeppers
Date Posted: December 13, 2005 at 2:24 AM
Gary Kline
MECP Master Technician<- i figured a master MECP tech would know how to wire a 5wire relay.....that is wired....
-------------
Where theres is a wire there's a way.
Posted By: Mike M2
Date Posted: December 13, 2005 at 6:09 AM
I would check the trunk release polarity if you are getting it at the switch. Even tho DEI lists it as 5 wire, many are negative pulse on Sebrings....
-------------
Mike M2
Tech Manager
CS Dealer Services
|