all door unlock feature

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6834
Printed Date: May 10, 2024 at 11:52 AM

Topic: all door unlock feature

Posted By: demeanor
Subject: all door unlock feature
Date Posted: December 17, 2002 at 9:31 PM

I'm trying to do away with the feature of all door unlock. how i need it to work is when the key is inserted in any of the doors, only that door will open, i found a wire in the door cylinder and disconnected it. is there any other alternatives? how can i make the alarm do priority door unlock (one pulse-one door, tow pulses-all doors)?

i also have a couple of questions concerning the security integrity of hondas. any one feel up to the challenge let me know so that i could email them to you. theese are good questions that i definitely want the answers to.

thanks in advanced.

-------------
It's better to ask a "STUPID" question...than to know a "STUPID" answer. :-)

Replies:

Posted By: Velocity Motors
Date Posted: December 18, 2002 at 12:30 AM

Priority Door Lock Relay

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: demeanor
Date Posted: December 18, 2002 at 4:04 AM

thanks a buch jeff. the info is very clear an to the point. do i still leave the wire from the door-key switch unplugged?

-------------
It's better to ask a "STUPID" question...than to know a "STUPID" answer. :-)

Posted By: Velocity Motors
Date Posted: December 18, 2002 at 9:25 AM

Try it unplugged and installed. If it works either way, you may as well plug it back in.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: demeanor
Date Posted: December 18, 2002 at 4:30 PM

Hey jeff...this might be an airheaded question, but, how is the signal going to be distinguishable to the relays if one wire comes out of the alram as "unlock (-) " if tey're both tied into the same output, won't both relays give a ground to the actuators?

thanks in advanced.

J.A.

-------------
It's better to ask a "STUPID" question...than to know a "STUPID" answer. :-)

Posted By: JasonL
Date Posted: December 18, 2002 at 6:42 PM

I believe that diagram assumes you have an alarm with more than one unlock output. Notice that one pulse goes to the first unlock relay, and the second pulse goes to the second unlock relay.

Posted By: demeanor
Date Posted: December 19, 2002 at 2:56 PM

are there many alalarms that come with more than one unlock output? mine only has one unlock, and one lock wires out of the brain module.

freedom 500 if you have any ideas.

-------------
It's better to ask a "STUPID" question...than to know a "STUPID" answer. :-)