program remote Comand Start 200

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68937
Printed Date: May 15, 2024 at 3:46 AM

Topic: program remote Comand Start 200

Posted By: hooligand
Subject: program remote Comand Start 200
Date Posted: December 22, 2005 at 9:15 AM

My dad just picked up a used truck that has a comand start 200 series remote starter. It isn't starting, checked the switch, batteries in the remotes and the fuses as well as all connections. I figure that the remote just needs to be programed but I can't find out how to , can anyone help?

It is a 1998 Comand Start series 200 and is installed in a 98 Toyota Tacoma 2.4L 4 cyl.

Thanks

Replies:

Posted By: hooligand
Date Posted: January 03, 2006 at 1:44 PM

*bump- can anybody help me out with this.

I have heard something like you turn the key to the on position and then press the hood pin switch 5 times, hit the brake pedal then hit button 1 then 2.

Does this sound right?

Posted By: Velocity Motors
Date Posted: January 03, 2006 at 9:56 PM

Flash the hood pin switch and then press button #1 will program the remote. When referring to flashing the hood pin, you have to press the hood pin down and release, within 1 second press it down again and leave up. Parking lights will stay on now for at least 4 seconds, then press button #1

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: hooligand
Date Posted: January 04, 2006 at 10:44 AM

Thanks Jeff

Print Page | Close Window