add remote starter to existing alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68946
Printed Date: May 15, 2024 at 2:22 AM

Topic: add remote starter to existing alarm

Posted By: jayyzr
Subject: add remote starter to existing alarm
Date Posted: December 22, 2005 at 11:23 AM

I am adding a remote starter to a car that has a cheap no name alarm w/ a shock sensor and starter disable... Basically what Im trying to do is bypass the shock sensor and starter relay. But I really only have to bypass the shock sensor b/c I can just put the starter wire to the starter side.... Then Run A relay on the power to the shock sensor w/ ground starter output from the remote starter???Does that sound right??? Any suggestions

-------------
Taking It 1 Wire @ A Time...

Replies:

Posted By: KPierson
Date Posted: December 22, 2005 at 11:52 AM

I would use the igniton output of the remote start to trigger a relay to break the power feed to the shock sensor. This way, whenever the ignition is powered on the shock sensor won't work.

-------------
Kevin Pierson

Posted By: jayyzr
Date Posted: December 22, 2005 at 11:58 AM

Thanks how would I wire it..

-------------
Taking It 1 Wire @ A Time...

Posted By: jayyzr
Date Posted: December 22, 2005 at 12:42 PM

I need to know how to wire up the relay Thanks

-------------
Taking It 1 Wire @ A Time...

Posted By: KPierson
Date Posted: December 22, 2005 at 1:05 PM

Pin 85 - Ignition out
Pin 86 - Ground
Pin 87A - Output to shock sensor power from Alarm
Pin 30 - Output to shock sensor power to shock sensor

-------------
Kevin Pierson

Posted By: jayyzr
Date Posted: December 22, 2005 at 2:33 PM

thanks I got it

-------------
Taking It 1 Wire @ A Time...

Print Page | Close Window