programming compustar 2w900fmr
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69111
Printed Date: April 29, 2024 at 4:26 PM
Topic: programming compustar 2w900fmr
Posted By: boostedgts
Subject: programming compustar 2w900fmr
Date Posted: December 24, 2005 at 2:22 PM
I have a compustar 2w900fmr alarm. I had problem with the brain so i had to send it back. They sent me a new one, I plugged it in and it won't do anything. I assume it has to be reprogrammed. Any tips on how to do this? thanks!
Replies:
Posted By: forbidden
Date Posted: December 24, 2005 at 2:29 PM
Cycle the ignition on and off 5 times rapidly and leave in the on position. Immediately press the lock button on the first remote, watch for one light flash, then press the lock button on the second remote, watch for a light flash. Wait for a series of flashes or 20 seconds, turn ignition off and you test the remotes.
-------------
Top Secret, I can tell you but then my wife will kill me.
Posted By: JWorm
Date Posted: December 24, 2005 at 9:44 PM
You'll also need to learn tach. Start car, let it get down to a normal idle, then push the programming button on the side of the brain. Lights should flash once.
Posted By: boostedgts
Date Posted: December 25, 2005 at 11:54 AM
hey guys thanks for the replies.
I tried both things and neither worked.
I tried to program the remotes, I did the 5 clicks. It blinked twice but when i pressed the button on the remote nothing happens.
I tried the tach learn as well and when i press the button nothing happens. no flash at all.
Any suggestions?
thanks!
Posted By: Velocity Motors
Date Posted: December 25, 2005 at 11:58 AM
Make sure you have the antenna plugged into the unit as well as the antenna itself otherwise you will not get it to program.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: boostedgts
Date Posted: December 25, 2005 at 12:37 PM
OK i got it to work, my problem is that i wasn't pressing the button on the remote right away, "Immediately" was the keyword. I was doing after the lights flash twice and it had to be before that.
I also did the tach learn and the remote start worked too.
thanks a lot!
|