Ungo MS2000 and Bulldog rs
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69212
Printed Date: May 13, 2024 at 9:36 PM
Topic: Ungo MS2000 and Bulldog rs
Posted By: bluehat42
Subject: Ungo MS2000 and Bulldog rs
Date Posted: December 26, 2005 at 1:51 PM
I have a 1990 Jeep cherokee with a older Ungo MS2000 alarm. I am going to be installing a Bulldog remote starter on the vehicle and attempt to use the ungo for controlling the unit. I am planning on using the 3rd button/auxillary output on the Ungo alarm remote for the starter function. My questions is with this setup will i be able able to RS the vehicle and leave the doors locked, or will the alarm contiue to dIsarm silently as it does now? having the alarm armed durting the RS run time is not important to me but having the doors locked would be a nice feature to have. If you have any input on this or have run into this before any help would be appreciated before i get started on my little project next weekend. Thanks in advance
Replies:
Posted By: bluehat42
Date Posted: December 27, 2005 at 8:40 PM
Bump: any help ??
|