AVG4 and 03 Dakota
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69765
Printed Date: May 28, 2024 at 11:42 PM
Topic: AVG4 and 03 Dakota
Posted By: Forseti
Subject: AVG4 and 03 Dakota
Date Posted: January 01, 2006 at 4:48 PM
Im surrently installing a Avantguard 4 into a 2003 Dodge Dakota. I have ran into one problem I need to have cleared up. For the door trigers I had to Diode isolate the tan(drivers door) and the tan/red (passenger door). Now in doing that how will the alarm turn on the dome lights? Or do I just wire the door triger wire into the yellow wire feeding the dome light?
Replies:
Posted By: Forseti
Date Posted: January 01, 2006 at 5:18 PM
Ok .. call me stupid ...... the diodes need to be between the CTM and the door trigers and the alarm wire between the diode and the triggers..... right ?
Posted By: scirocco16v
Date Posted: January 01, 2006 at 6:01 PM
That is correct but, you will also need to split the trigger input from the alarm and if you use diodes to do this it will not illuminate the dome light. When faced with situation on cliffords I used to use the gray trigger for the drivers door and the gray / YELLOW trigger for the other doors.
Posted By: Forseti
Date Posted: January 01, 2006 at 7:15 PM
So would it be better to tie into the yellow dome light wire and use the entry delay option on the AVG 4 ?
|