Print Page | Close Window

2000 Isuzu Rodeo Remote Start/Keyless/Ala

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70088
Printed Date: April 27, 2024 at 11:43 AM


Topic: 2000 Isuzu Rodeo Remote Start/Keyless/Ala

Posted By: jsinclair4
Subject: 2000 Isuzu Rodeo Remote Start/Keyless/Ala
Date Posted: January 04, 2006 at 11:52 PM

I started to install a commando remote start/keyless entry/alarm on my rodeo today and ran into a few problems. First, I could not find the lock or unlock wire on the 22 pin connector. (Anyone else run into this problem?) I ended up just running the wires from the keyless entry box on the passenger side and the doors would lock, then unlock. I've changed the setting on the alarm from .8 second signal to a 6.5, but everytime it still ended up unlocking. After removing working with this for a while, the door unlock button would not work for any of the doors and no noises would be made but the lock would still work. Any words of wisdom for me. John



Replies:

Posted By: Mike M2
Date Posted: January 05, 2006 at 6:42 AM

Tho it doesn't say on the Directsheets, i believe you had to test the lock wires that are in the drivers kickpanel by pressing the button on the passenger door....



-------------
Mike M2
Tech Manager
CS Dealer Services


Print Page | Close Window