2002 chevy blazer remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70357
Printed Date: May 29, 2024 at 3:15 AM

Topic: 2002 chevy blazer remote start

Posted By: umpbush
Subject: 2002 chevy blazer remote start
Date Posted: January 02, 2006 at 12:47 PM

I am looking to install a remote starter in my 2002 Chevy Blazer and was wondering from you experienced installers which bypass modules are the best and most compatible with my vehicle. Do any have more features or anything that I should be aware of? Where are the best places and prices to get them?

Thanks

Brandon

Replies:

Posted By: sparkie
Date Posted: January 02, 2006 at 3:36 PM

Your vehicle uses a Passlock II system. There are many different modules available. I don't know of any modules that can do anything other than interface with the Passlock system. The door locks are a psoitve pulse system. Nothing else in those trucks can really be done through a data module. I would recommend a GMBP module availabe from www.bypasskit.com

-------------
sparky

Posted By: cntrylvr79
Date Posted: January 02, 2006 at 10:50 PM

Never had a problem the a 555L in that truck. Like sparkie said the passlock bypass is all that you really need for that truck everything else is straight forward.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer

Posted By: umpbush
Date Posted: January 08, 2006 at 8:27 PM

i am gettin ready to install a 2way RS Crimestopper RS-999TW1 on my 02 blazer. can anyone direct me wiring diagrams for this RS and a GM-SL bypass module. any tips or things to look for.

Thank very much!

Brandon

Posted By: kohara73
Date Posted: January 08, 2006 at 8:38 PM

https://www.directechs.com/directwire/wire_body.asp?action=select&yr=3441&product=Security

https://www.directwholesale.net/diagrams/printpage.asp?ModelID=19614&MakeID=54

-------------
Keith

Posted By: kohara73
Date Posted: January 08, 2006 at 8:44 PM

Oops...that first link should be..

https://www.directechs.com/directwire/wire_body.asp?action=select&yr=3441&product=Remote%20Start

Sorry.

-------------
Keith

Posted By: umpbush
Date Posted: January 08, 2006 at 9:38 PM

thanks for the reply

Posted By: umpbush
Date Posted: January 29, 2006 at 4:58 PM

I am trying to take off the lower portion of the dash on my 2002 Blazer and am not sure how to remove the emergency brake lever to take out the dash portion. Can anyone help me in this process?

Thanks

Brandon

Posted By: nattopdog
Date Posted: January 29, 2006 at 5:14 PM

i believe there is a screw underneath the handle. I may be wrong but i am not sure.

Posted By: serialthrlla
Date Posted: January 29, 2006 at 5:47 PM

you disconnect the cable from the emergency brake itself nd leave it connected to the release handle....

Also. you may want to check for sure but I've had problems with the GMSL not workin on regular S10's.. not sure about the blazers though but I believe they are very similar..

Posted By: umpbush
Date Posted: January 29, 2006 at 6:15 PM

got the e brake unhooked and now testing and finding all correct wires. thanks.

Brandon

Posted By: umpbush
Date Posted: January 29, 2006 at 6:26 PM

What problems with the GMSL? Also, I did a remote start a long time ago and it was on a vehicle with no need for a bypass module. I understand how to wire the entire Crimestopper RS999TW1 but I am not sure the correct procedures for wiring the bypass module. Do I have to wire into the RS on anything or just hook into wires as wiring diagram shows for bypass module. Thank you for all your help as I may have more questions during the wiring process.

Brandon