Programming a Viper 791xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70684
Printed Date: May 18, 2024 at 7:34 PM

Topic: Programming a Viper 791xv

Posted By: snopro1
Subject: Programming a Viper 791xv
Date Posted: January 13, 2006 at 2:06 PM

any info on programming the Viper 791xv

I just installed it, have signal to remote but whats next to program it.

Replies:

Posted By: kgerry
Date Posted: January 13, 2006 at 2:20 PM

depends on what features you wish to change... the default settings cover most installs......

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: snopro1
Date Posted: January 13, 2006 at 8:28 PM

Initall programming. or dedfult auto learn.

I wired it up, but remote dosent cotrol anything.

i may have messed it all up trying.

unit seams to work , alarm chirps, doors lock with key on.

if i depress valet i only get 1 ,2 or 3 blinks then siren goes off.

It is a truck, no hood pins

nemote start dosent work either.

Posted By: snopro1
Date Posted: January 13, 2006 at 8:29 PM

oh. it is a 99 ford f 250 superduty supercab gas motor

Posted By: 97f150ext
Date Posted: January 14, 2006 at 11:59 AM

to program remotes,
turn the ignition to the ON position
press the program button once and then HOLD
press the Lock button the transmitter
the unit will Chirp (if connected)
then release the program button

of course be sure to test all functions of the remote once this is completed

Posted By: snopro1
Date Posted: January 14, 2006 at 1:18 PM

Remote dosent respond at all. whe i tried that, would i have to have a dealer unlockthe system first, or shouldnt it be locked.

Posted By: 97f150ext
Date Posted: January 15, 2006 at 9:40 PM

did you just try one remote or both?

Posted By: anickle
Date Posted: January 15, 2006 at 11:23 PM

you probably want that hood pin hook up for theft and safety reasons

-------------
andrew nickle

Posted By: kgerry
Date Posted: January 16, 2006 at 8:50 AM

the system is not locked if new... you probably dont have communication with the antenna.... are you sure it's plugged in correctly?

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: snopro1
Date Posted: January 16, 2006 at 8:40 PM

Thats what it was antenna wasnt connected all the way.