Print Page | Close Window

Clifford Intelliguard 850, false trigger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71035
Printed Date: May 14, 2024 at 10:21 PM


Topic: Clifford Intelliguard 850, false trigger

Posted By: Sungura222
Subject: Clifford Intelliguard 850, false trigger
Date Posted: January 18, 2006 at 10:25 AM

This thing is starting to annoy me. When armed, the alarm  goes off whenever you go too close to the car.

The External Warning Zone  (from the digital proxy sensor) is activated and instead of chirping, and it sets off the whole alarm straight away. I've swapped the proximity sensor but it still happens. So its not a faulty dig. proxy sensor.

When checking the LED status event recall, I noticed that the LED flashes 5 times, indicating  zone 5 -trunk Trigger.

But when checking the LED event recall the other way ( Press unmarked button on valet switch & arm/disarm) the LED flashes 8 times.

I diconnected the trunk wire, omnisensor & motion sensor & tested leaving only the digital proxy sensor connected, but the external warning zone still triggers the full alarm, and reports to zone 5 & 8

This is really puzzling, and I'm having to overide all the sensors evertime I arm, inorder to avoid false alarms.

Can anybody suggest what could be wrong.

many Thanks

Sungura



-------------
(;-)



Replies:

Posted By: scirocco16v
Date Posted: January 18, 2006 at 7:33 PM
The interior zone of the sensor might be turned up too much and coming outside of the car



Posted By: Sungura222
Date Posted: January 19, 2006 at 12:01 PM

Thanks for that Scirocco, never thhought of the Primary zone.

I'ii try and lower the sensitivity, & see what happens

chess.



-------------
(;-)


Print Page | Close Window